What is plastic injection mold manufacturer?

A plastic injection mold manufacturer is a company that specializes in the production of plastic injection molds. These molds are used to create plastic parts and components for a variety of industries, including automotive, medical, and consumer products. The process of plastic injection molding involves the use of a heated plastic material, usually a thermoplastic or thermoset, which is injected into a mold cavity. The mold cavity is then cooled and the plastic part is ejected from the mold.

The plastic

What is plastic injection molding?

Plastic injection molding is a manufacturing process for producing parts by injecting molten plastic material into a mold. It is a versatile process that can produce a wide variety of parts with a high degree of accuracy and repeatability. Injection molding is widely used for producing a variety of parts, from small components like fasteners and connectors to larger components like automotive body panels and appliance housings.

The injection molding process begins with the creation of a mold, which is typically made from steel

Injection molding is a complex manufacturing process. Using a specialized hydraulic or electric machine, the process melts, injects and sets plastic into the shape of a metal mold that’s fitted into the machine.

Plastic injection molding is the most widely used components manufacturing process for a variety of reasons, including:

Flexibility: manufacturers can choose the mold design and type of thermoplastic that’s used for each component. This means the plastic mold factory can produce a variety of components, including parts that are complex and highly detailed.

Efficiency: once the process has been set up and tested, injection molding machines can produce thousands of items per hour. Using electric injection molding machines also makes the process relatively energy efficient.

Consistency: if the process parameters are tightly controlled, the injection molding process can produce thousands of components quickly at a consistent quality.

Cost-effectiveness: once the mold (which is the most expensive element) has been built, the cost of production per component is relatively low, particularly if created in high numbers.

Quality: whether manufacturers are looking for strong, tensile or highly detailed components, the injection molding process is able to produce them at a high quality repeatedly.

This cost-effectiveness, efficiency and component quality are just some of the reasons why many industries choose to use injection molded parts for their products.

How does injection molding work?

Although on the face of it, the injection molding process may seem simple, there are many parameters which need to be tightly controlled to ensure the overall quality of the plastic components produced. Understanding the process and parameters in some depth will help manufacturers to identify plastic components producers who can provide the quality and consistency they need.

Step 1: selecting the right thermoplastic and mold

Before the actual process begins, it’s key that the right thermoplastics and molds are selected or created, as these are the essential elements that create and form the final components. Indeed, to make the right selection, manufacturers need to consider how the thermoplastic and mold interact together, as certain types of plastics might not be suitable for particular mold designs.

Each mold tool is made up of two parts: the cavity and the core. The cavity is a fixed part that the plastic is injected into, and the core is a moving part that fits into the cavity to help form the component’s final shape. Depending on requirements, mold tools can be designed to produce multiple or complex components. The repeated high pressures and temperatures that mold tools are put under mean they are typically made from steel or aluminum.

Due to the high level of design and quality of materials involved, developing mold tools is a long and expensive process. Hence, before creating a final bespoke mold, it’s recommended that tools are created, prototyped and tested using computer aided design (CAD) and 3D printing technology. These tools can be used to digitally develop or create a prototype mold that can then be tested in the machine with the chosen thermoplastic.

Testing the tool with the right thermoplastic is key to ensuring that the final component has the right properties. Each thermoplastic offers different characteristics, temperature and pressure resistances due to their molecular structure. Plastics with an ordered molecular structure are called semi-crystalline and those with a looser structure are known as amorphous plastics.

Each plastic’s properties will make them appropriate for use in certain molds and components. The most common thermoplastics used in injection molding and their characteristics include:

Acrylonitrile-Butadiene-Styrene (ABS) – with a smooth, rigid and tough finish, ABS is great for components that require tensile strength and stability.

Nylons (PA) – available in a range of types, different nylons offer various properties. Typically, nylons have good temperature and chemical resistance and can absorb moisture.

Polycarbonate (PC) – a high-performance plastic, PC is lightweight, has high impact strength and stability, alongside some good electrical properties.

Polypropylene (PP) – with good fatigue and heat resistance, PP is semi-rigid, translucent and tough.

The final thermoplastic selection will depend on the characteristics that manufacturers need from their final component and the design of the mold tool. For example, if a manufacturer needs a lightweight part with electrical properties, then PC will be appropriate, but only if the mold doesn’t need to operate above 135C or at very high pressures, which the plastic won’t be able to resist.

Once the right thermoplastic and mold have been tested and selected, the injection molding process can begin.

Step 2: feeding and melting the thermoplastic

Injection molding machines can be powered by either hydraulics or electricity. Increasingly, Essentra Components is replacing its hydraulic machines with electric-powered injection molding machines, showing significant cost and energy savings. At their most basic level, these machines consist of a feeder or ‘hopper’ at the top of the machine; a long, cylindrical heated barrel, which a large injection screw sits in; a gate, which sits at the end of the barrel; and the chosen mold tool, which the gate is connected to.

To start the process, raw pellets of the chosen thermoplastics are fed into the hopper at the top of the machine. As the screw turns, these pellets are fed gradually into the barrel of the machine. The turning of the screw and the heat from the barrel gradually warm and melt the thermoplastic until it is molten.

Maintaining the right temperatures within this part of the process is key to ensuring the plastic can be injected efficiently and the final part formed accurately.

Step 3: injecting the plastic into the mold

Once the molten plastic reaches the end of the barrel, the gate (which controls the injection of plastic) closes and the screw moves back. This draws through a set amount of plastic and builds up the pressure in the screw ready for injection. At the same time, the two parts of the mold tool close together and are held under high pressure, known as clamp pressure.

Injection pressure and clamp pressure must be balanced to ensure the part forms correctly and that no plastic escapes the tool during injection. Once the right pressure in the tool and screw is reached, the gate opens, the screw moves forward, and the molten plastic is injected into the mold.

Step 4: holding and cooling time

Once most of the plastic is injected into the mold, it is held under pressure for a set period. This is known as ‘holding time’ and can range from milliseconds to minutes depending on the type of thermoplastic and complexity of the part. This holding time is key to ensuring that the plastic packs out the tool and is formed correctly.

After the holding phase, the screw draws back, releasing pressure and allowing the part to cool in the mold. This is known as ‘cooling time’, it can also range from a few seconds to some minutes and ensures that the component sets correctly before being ejected and finished on the production line.

Injection molding machine

Step 5: ejection and finishing processes

After the holding and cooling times have passed and the part is mostly formed, pins or plates eject the parts from the tool. These drop into a compartment or onto a conveyor belt at the bottom of the machine. In some cases, finishing processes such as polishing, dying or removing excess plastic (known as spurs) may be required, which can be completed by other machinery or operators. Once these processes are complete, the components will be ready to be packed up and distributed to manufacturers.

How do plastic injection molding machines work?

Plastic injection molding machines are used to produce a wide variety of plastic products, from medical equipment to toys. The process of injection molding involves melting plastic pellets and injecting them into a mold cavity. The molten plastic is then cooled and ejected from the mold.

The injection molding machine consists of several components, including a hopper, a barrel, a screw, a nozzle, a mold, and a clamping unit. The hopper is used to store the plastic pellets that

Can thermosetting plastics be used in injection molding?

Yes, thermosetting plastics can be used in injection molding. Thermosetting plastics are a type of plastic that is cured or hardened by heat and pressure. They are typically used in applications where strength and durability are required, such as in automotive and aerospace components. Injection molding is a process in which molten plastic is injected into a mold cavity to form a part. This process is used to produce a wide variety of parts, from small components to large, complex parts.